67
EN
Loose clothes, jewellery or long hair can be
caught in moving parts.
g)
Keep adequate safety distance from the
machine.
Don‘t touch the running mixer
drum.
There is a risk of getting caught and
injured.
MACHINE USE AND CARE
b)
Do not use the machine if the switches
do not turn it on and off.
Any machine that
cannot be controlled with the switches is
dangerous and must be repaired.
c) Disconnect the plug from the power
source before:
• relocation and transport
• cleaning, checking and maintenance
• failure removal
• leaving
(even in case of short interruption)
• storing.
Such preventive safety measures reduce
the risk of starting the machine accidentally.
d)
Store idle machines out of the reach of
children and do not allow persons unfa-
miliar with the machine or these instruc-
tions to operate the machine.
Machines
are dangerous in the hands of untrained us-
ers.
e)
Maintain machines. Check for misalign-
ment or binding of moving parts, break-
age of parts and any other condition that
may affect the machine’s operation. If
damaged, have the machine repaired
before use.
Many accidents are caused by
poorly maintained machines.
f)
Never operate a machine with missing,
defective or damaged parts, labels or
cable. Have defective machines repaired
immediately.
Properly maintained ma-
chines reduce the risk of injury.
g)
Use the machine in accordance with
these instructions, taking into account
the working conditions and the work to
be performed.
Use of the machine for op-
erations different from those intended could
result in a hazardous situation.
g)
Do not modify the machine or any of its
parts.
Many accidents are caused by ma-
nipulated machines.
SERVICE
a)
Have your machine serviced by a recog-
nised workshop using only identical re-
placement parts.
This will ensure that the
safety of the machine is maintained.
MACHINE SPECIFIC SAFETY WARNINGS
a)
Do not operate the mixer unattended.
as
this may lead to accidents
b)
Only fill and empty the mixer drum when
the motor is running.
to avoid damage to
the machine.
c)
Do not change the motor speed.
Exces-
sive speed may damage the motor and all
rotating parts.
d)
Move the concrete mixer only by manual
movement. Falling
Injury.
e)
Keep any equipment not being used in
dry, frost free and locked locations.
Damage to the machine injury.
Summary of Contents for 5960984
