3
2
DCC Ready
Fig.2
Fig.1
Lubrication
IMPORTANT – Only apply small single drops of light machine oil to the places indicated in red in Fig.2. This is best achieved by making a simple oil “dropper” as illustrated in Fig.1.
Insert a straightened paper clip into a cork and use a bottle cap as a container for the oil. A small drop of oil can then be picked up by the dropper and applied in exactly the right place.
Immediately wipe off any excess oil, especially from the locomotive body. Only lubricate moving parts.
Fig.3
Fig.6
Body Removal
Remove screw from rear of locomotive body as shown in Fig.3. Ease chassis back to disengage chassis locating lugs and down as shown in Fig 4.
When re-assembling, relocate the chassis lugs into the body slots as shown in Fig 5 and ease body back into place. Replace screw
Fig.4
Fig.5
1
3
2
