Fertiliser and dressed seed
Inappropriate handling of fertiliser and dressed
seed can cause poisoning and death.
¾
Follow the information given in the safety
data sheet of the manufacturer. If necessary
ask the dealer for the corresponding safety
data sheet.
¾
Determine and provide the personal protective
outfit as specified by the manufacturer.
Environmental protection
Operating materials such as hydraulic oil, lubri-
cants, etc. can damage the environment and the
health of persons.
¾
Do not allow operating materials to drain out
into the environment.
¾
Take up drained operating materials with
absorbent material or sand, fill it into a leak
tight tank and dispose of in accordance with
statutory regulations.
Retrofits
Structural changes and extensions can adverse-
ly affect the functionality and the operational
safety of the machine. This can lead to severe
or even fatal physical injuries.
¾
Do not make any structural changes or ex-
tensions to the machine that have not been
approved by HORSCH.
¾
Structural changes and extensions must only
be made in an authorized workshop or by an
operator who has been trained by HORSCH.
¾
Comply with country specific instructions for
weights, weight distribution and dimensions.
For equipment influencing the weight or weight
distribution one must check and comply with the
regulations concerning towing facilities, support
and axle loads.
For machines without brakes a brake system
may need to be retrofitted if the permissible
weight limits are exceeded.
In case of changes concerning data mentioned
on the type plate, a new type plate with updated
data must be attached.
In case of changes which concern the data in
the type approval, this type approval needs to
be renewed.
12
