background image

Table of contents

Introduction ...................................................4

Foreword ........................................................4

Notes on representation .................................4

Service............................................................5

Warranty claim processing .............................5

Consequential damage...................................5

Safety and responsibility .............................6

Intended use ...................................................6

Qualification of personnel

 ...............................7

Children in danger ..........................................7

Personal protective outfit

 ................................8

Safety in traffic

 ................................................8

Safety in operation

..........................................9

Fertiliser and dressed seed ..........................12

Environmental protection ..............................12

Retrofits

 ........................................................12

Care and maintenance .................................13

Danger zone .................................................14

Commissioning ...........................................15

Delivery.........................................................15

Transport ......................................................15

Installation ....................................................15

Safety stickers

 ..............................................16

Technical data .............................................19

Requirements for the tractor

 .........................20

Type plate .....................................................21

Structure......................................................23

Overview.......................................................23

Hydraulics .....................................................24

Identification of hydraulic hoses

 ...................24

Aluminium clips.............................................27

Lighting .........................................................28

Instruction stickers

 ........................................29

Operation .....................................................31

Connecting/Parking

 ......................................31

Connecting ...................................................31

Transport position .........................................33

Parking

 .........................................................34

Wings............................................................35

Unfolding

 ....................................................35

Folding .......................................................35

Use in the field

 ..............................................36

Checks before and during use on the field

 ...37

Assembly groups .......................................38

Pneumatic system ........................................38

DiscSystem ...................................................41

Fertiliser equipment PPF (option) .................42

Coulter ..........................................................44

Overview ....................................................44

Coulter disc scraper ...................................45

Press roller scraper ....................................45

Uniformer 

 ..................................................45

Press rollers ...............................................45

Rubber mounting

 .......................................46

Harrow .......................................................46

Depth setting ..............................................46

Coulter pressure ........................................47

Correlation .................................................47

Tightening torques on the coulter ..............48

Upper link

 .....................................................49

Border plates ................................................49

Optional equipment ....................................50

Brake system

 ................................................50

Pneumatic brake

 ........................................50

Hydraulic brake

 ..........................................51

Parking brake

 .............................................51

Front packer

 .................................................52

Pre-emergence markers

 ...............................53

Bout marker

 ..................................................54

Liquid fertiliser system

 ..................................55

2

Summary of Contents for Pronto 8 SW













































































Reviews: