3
Thank you for purchasing your new
CHCFE
Horst Contour 4 Wheel Steer Header Wagon.
Your Contour Header Wagon
has been designed and manufactured to give you many years of dependable service. Horst CHC Series header wagons
unique design helps to increase productivity by ensuring safe, effective and speedy transport of your header from job site
to job site.
Trailing your combine head with a Horst CHCE Wagon keeps you moving with safe and easy road travel. The no-sway
design of Horst’s running gear provides a smooth trailing wagon that eliminates the zig-zag action. The predictable trailing
movement of Horst’s Header Wagons is especially important for combine operators who don’t have a clear rear-view and
need to rely on a steady trailing wagon.
The CHCFE series header wagons feature LED tail light indicators and rear electric brakes to give you more control and
confidence when transporting your head from field to field. Each 12” brake is equipped with 2” wide non asbestos brake
pads and rated at 2600 lb capacity, for extra vehicle control.
Safe, efficient and trouble free operation of your CHCFE header wagon requires that you or any other person, who will
be assembling, operating, maintaining or working with this product, are required to read and completely understand the
information and instructions contained in this manual.
If anyone does not fully understand every part of this manual, please obtain further assistance by contacting the dealer
from which this product was purchased or by contacting Horst Welding with the information listed on the cover of this
manual.
Keep this operators manual available for reference by the operator and to pass on to new owners and/or operators .
Assembly may be required depending on how you purchased your wagon. Follow the assembly procedures as outlined in
the assembly manual.
This manual covers models:
CHCFE30, CHCFE36, CHCFE3627, CHCFE45 CHCFE4527
In this manual the CHCFE series header wagons may be referred to as “implement”, “wagon” or “header wagon”
Introduction
Manufactured by
HORST WELDING
MODEL NO.
SERIAL NO.
MADE IN CANADA
Model Number
_________________________________________________________
Serial Number
_________________________________________________________
Serial Number Location
The serial number for your Contour Header Wagon is located on the back top right side of the rear axle.
Please record your serial number here as a handy reference. In case of warranty issues, your dealer will ask for the serial
to verify your warranty.
Manufactured by
HORST WELDING
MODEL NO.
SERIAL NO.
MADE IN CANADA
