background image

Programme Override Facilities

With the ServicePlus S17R timeswitch operating in the normal 
running  mode  it  is  possible  to  alter  the  functionality  of  the 
programme by means of the SELECT button.
The options include;

AUTO 

 

Timeswitch follows all programmed ‘ON’ and ‘OFF’ 

 

times.

ALL DAY

  Timeswitch operates from 1st ‘ON’ time until 3rd 

 

’OFF’, ignoring all switching times in between.

24HRS

   Timeswitch will be constantly ‘ON’.

OFF

  

Timeswitch will be constantly ‘OFF’, there is the 

 

ability to turn off the heating during the summer 

 

without altering the programme times. Boost is still 

 

available.

All  of  the  settings  above  will  be  permanent,  i.e.  unaffected  by 
programme times, until alteration by the user.
The diagram below illustrates how to alter the setting, it assumes 
that the programme is in the AUTO mode to begin with.

4

Press SELECT
once.
Programme
goes from
AUTO to 
ALL DAY

PM

AUTO
ALL DAY
24 HRS
OFF

6:35

PM

AUTO
ALL DAY
24 HRS
OFF

6:35

PM

AUTO
ALL DAY
24 HRS
OFF

6:35

PM

AUTO
ALL DAY
24 HRS
OFF

6:35

Press SELECT
again.
Programme
goes from
ALL DAY to
24 HRS

Press SELECT
again.
Programme
goes from
24 HRS to OFF

Press SELECT
again.
Programme
goes from
OFF to AUTO

Timeswitch
will operate
from 1st ON
until 3rd OFF
period

Timeswitch
will be
continuously
ON

Timeswitch
will be
continuously
OFF

Programme
will return
to normal
ON and OFF
times

Summary of Contents for ServicePlus S17R Series 2









Reviews: