Hortus 211-320 Instructions Manual Download

Page: 8 / 32

Instruction

OPTIONAL FUNCTIONS BBQ / FIREPLACE CHARCOAL LIGHTER (Fig. D)

The BBQ and fireplace charcoal lighter is always to be used without the extension handle. Remove

the extension handle by pressing and releasing button

OPTIONAL FUNCTIONS

BBQ / FIREPLACE CHARCOAL LIGHTER (Fig. D)

The BBQ and fi replace charcoal lighter is always to be used without the extension handle. Remove
the extension handle by pressing and releasing button

and pulling the extension handle from the

device.

Use:

Attach the BBQ / fi replace charcoal lighter nozzle

onto the device

Select temperature setting II

Place the nozzle under the coal or the wood

Ensure that the device is properly positioned. The kickstand

could be used to fi rmly support

the device in the proper position

Insert the plug into the socket

Check to ensure the nozzle is not blocked before turning the device on

Remove the device from the coals or the wood as soon as it starts to glow

Now blow hot air into the coals or wood from a distance of around 5-10 cm, until the coals or

wood are burning properly

Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high

temperatures for a prolonged period of time could cause the material to melt. Please follow
these instructions to achieve long-term enjoyment with the device.

Watch Out!

To avoid overheating of the BBQ or fi replace do not use the device for longer than necessary.

– ensure that the device is properly positioned;
– unplug the device immediately after use;
– allow the device to cool before storage;
– do not allow the hot parts of the device to touch the cord or other fl ammable materials.

Cooling

Before turning off the device, it must be cooled fi rst. Select temperature setting I for at least one
minute. The device can be switched off thereafter. Place the device on its kickstand

after use and

allow it to cool down before storage.

ENGLISH

BSI0616bsThKi_19489.indd 9

16/09/16 10:33

and pulling the extension handle from the

device.

Use:

Attach the BBQ / fireplace charcoal lighter nozzle

•

OPTIONAL FUNCTIONS

BBQ / FIREPLACE CHARCOAL LIGHTER (Fig. D)

The BBQ and fi replace charcoal lighter is always to be used without the extension handle. Remove
the extension handle by pressing and releasing button

and pulling the extension handle from the

device.

Use:

Attach the BBQ / fi replace charcoal lighter nozzle

onto the device

Select temperature setting II

Place the nozzle under the coal or the wood

Ensure that the device is properly positioned. The kickstand

could be used to fi rmly support

the device in the proper position

Insert the plug into the socket

Check to ensure the nozzle is not blocked before turning the device on

Remove the device from the coals or the wood as soon as it starts to glow

Now blow hot air into the coals or wood from a distance of around 5-10 cm, until the coals or

wood are burning properly

Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high

temperatures for a prolonged period of time could cause the material to melt. Please follow
these instructions to achieve long-term enjoyment with the device.

Watch Out!

To avoid overheating of the BBQ or fi replace do not use the device for longer than necessary.

Cooling

Before turning off the device, it must be cooled fi rst. Select temperature setting I for at least one
minute. The device can be switched off thereafter. Place the device on its kickstand

after use and

allow it to cool down before storage.

ENGLISH

BSI0616bsThKi_19489.indd 9

16/09/16 10:33

onto the device.

Select temperature setting II.

•

Place the nozzle under the coal or the wood.

•

Ensure that the device is properly positioned. The kickstand

•

OPTIONAL FUNCTIONS

BBQ / FIREPLACE CHARCOAL LIGHTER (Fig. D)

The BBQ and fi replace charcoal lighter is always to be used without the extension handle. Remove
the extension handle by pressing and releasing button

and pulling the extension handle from the

device.

Use:

Attach the BBQ / fi replace charcoal lighter nozzle

onto the device

Select temperature setting II

Place the nozzle under the coal or the wood

Ensure that the device is properly positioned. The kickstand

could be used to fi rmly support

the device in the proper position

Insert the plug into the socket

Check to ensure the nozzle is not blocked before turning the device on

Remove the device from the coals or the wood as soon as it starts to glow

Now blow hot air into the coals or wood from a distance of around 5-10 cm, until the coals or

wood are burning properly

Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high

temperatures for a prolonged period of time could cause the material to melt. Please follow
these instructions to achieve long-term enjoyment with the device.

Watch Out!

To avoid overheating of the BBQ or fi replace do not use the device for longer than necessary.

Cooling

Before turning off the device, it must be cooled fi rst. Select temperature setting I for at least one
minute. The device can be switched off thereafter. Place the device on its kickstand

after use and

allow it to cool down before storage.

ENGLISH

BSI0616bsThKi_19489.indd 9

16/09/16 10:33

could be used to firmly support

the device in the proper position.

Insert the plug into the socket.

•

Check to ensure the nozzle is not blocked before turning the device on.

•

Remove the device from the coals or the wood as soon as it starts to glow.

•

Now blow hot air into the coals or wood from a distance of around 5-10 cm, until the coals or

•

wood are burning properly.

Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high

•

temperatures for a prolonged period of time could cause the material to melt. Please follow

these instructions to achieve long-term enjoyment with the device.

Watch Out!

To avoid overheating of the BBQ or fireplace do not use the device for longer than necessary.

– ensure that the device is properly positioned;

– unplug the device immediately after use;

– allow the device to cool before storage;

– do not allow the hot parts of the device to touch the cord or other flammable materials.

Cooling

Before turning off the device, it must be cooled first. Select temperature setting I for at least one

minute. The device can be switched off thereafter. Place the device on its kickstand

OPTIONAL FUNCTIONS

BBQ / FIREPLACE CHARCOAL LIGHTER (Fig. D)

The BBQ and fi replace charcoal lighter is always to be used without the extension handle. Remove
the extension handle by pressing and releasing button

and pulling the extension handle from the

device.

Use:

Attach the BBQ / fi replace charcoal lighter nozzle

onto the device

Select temperature setting II

Place the nozzle under the coal or the wood

Ensure that the device is properly positioned. The kickstand

could be used to fi rmly support

the device in the proper position

Insert the plug into the socket

Check to ensure the nozzle is not blocked before turning the device on

Remove the device from the coals or the wood as soon as it starts to glow

Now blow hot air into the coals or wood from a distance of around 5-10 cm, until the coals or

wood are burning properly

Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high

temperatures for a prolonged period of time could cause the material to melt. Please follow
these instructions to achieve long-term enjoyment with the device.

Watch Out!

To avoid overheating of the BBQ or fi replace do not use the device for longer than necessary.

Cooling

Before turning off the device, it must be cooled fi rst. Select temperature setting I for at least one
minute. The device can be switched off thereafter. Place the device on its kickstand

after use and

allow it to cool down before storage.

ENGLISH

BSI0616bsThKi_19489.indd 9

16/09/16 10:33

after use and

allow it to cool down before storage.

STORAGE

Make sure that the device has completely cooled down before storing.

CLEANING

Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean

the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from

dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.

TECHNICAL DATA

Voltage: 230V~ 50 Hz

Power: 2000 W

Air Flow: 500 litres / minute

Setting I: 50°C

Setting II: 600°C

DISPOSAL

Do not dispose of electric power tools with domestic refuse. The electric power tool is

shipped in packaging to reduce transport damage. This packaging is a raw material

and as such can either be reused or can be fed back into the raw material cycle.

The electric power tool and its accessories are made from various materials such as

metals and plastics. Take defective components to a special refuse collection point.

Ask about these at your specialist shop or local council.

STORAGE

Make sure that the device has completely cooled down before storing.

CLEANING

Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.

TECHNICAL DATA

Voltage:

230-240V~ 50 Hz

Power:

2000 W

Air Flow:

500 litres / minute

Setting I:

50°C

Setting II:

600°C

DISPOSAL

Do not dispose of electric power tools with domestic refuse. The electric power tool is
shipped in packaging to reduce transport damage. This packaging is a raw material
and as such can either be reused or can be fed back into the raw material cycle.
The electric power tool and its accessories are made from various materials such as
metals and plastics. Take defective components to a special refuse collection point.
Ask about these at your specialist shop or local council.

WARRANTY

As warranty in the event of manufacturing errors is valid a period of warranty of 24 months, during
which the device will be repaired or replaced. To enjoy the warranty, please send the device and proof
of payment, with date of purchase to: Warranty Services BSI, Jagershoek 13, B-8570 Vichte, Belgium.
Freight- and handling costs to send either the repaired or a new device back, normally comes to 15 €
+ VAT with a max. of 50 % of the purchase price and are at the expenses of the client. This amount
has to be transferred in advance on a bank account from which the number will be passed on after
receiving the broken device. Should the client want his device, no warranty applied, back, these freight
costs will also be charged. Device disposal: on the packaging is mentioned the symbol of a crossed-out
wheelie bin. This means, that one should inform oneself as to the way in which to dispose of the device
according to local regulations.

BSI0616bsThKi_19489.indd 10

16/09/16 10:33