Step 1:
Step 3:
Step 4:
Step 2:
Safety
latch
Lock
Open
Locking
toggle
Pole assembly instructions
Insert interchangeable blade into pole.
Push the locking pin on the safety latch forward.
Turn the locking pin 90 degrees to lock the safety latch
assembly.
Keep the safety latch in position as shown. Close the
locking toggle and clip the safety latch onto the pole.
Before beginning assembly, make sure the locking toggle
is open and the pole is extended.
For more information visit www.hoselink.com.au or call 1300 900 617
Assembly guide
Pole Pruner
Item: 6567
