2
1.
BEFORE YOU BEGIN
What is included
LED SPOT 60 MOVING HEAD
USER MANUAL
POWER PLUG
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to
ensure that all parts are present, and have been received in good condition. Notify the shipper
immediately and retain packing material for inspection if any parts appear damaged from
shipping or the carton itself shows sings of mishandling . Save the carton and all packing materials.
In the event that a fixture must be returned to the factory , it is important that the fixture be returned
in the original factory box and packing.
Safety Instructions
Please keep this User Guide for future consultation. If you sell the unit to another user ,be sure
that they also receive this instruction booklet.
Always make sure that you are connecting to the proper voltage , and that the line voltage you
are connecting to is not higher than that stated on the decal or rear panel of the fixture .
This product is intended for indoor use only!
To prevent risk of fire or shock ,do not expose fixture to rain or moisture .Make sure there are
no flammable materials close to the unit while operating.
The unit must be installed in a location with adequate ventilation , at least 20in (50cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
Always disconnect from power source before servicing or replacing fuse and be sure to replace
with same fuse size and type.
Secure fixture to fastening device using a safety chain .Never carry the fixture solely by head.
Use its carrying handles.
Maximum ambient temperature (Ta) is 104
°
F(40
°
C).Do not operate fixture at temperatures
higher than this.
In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself .Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center .Always use the same type spare
parts.
Don’t connect the device to a dimmer pack.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
