7
Three core canon plug DMX512 interface circuit
Maintenance
a
. If the light’s lens damaged or broken, and should need change the new lens, if the bulb damaged or have any
deformation, make the light dim, it says that the bulb had run out of its life., should change in time. There are 3
thermal protection device, using for cut off the lights power when it is heating. If the thermal protection device set up,
and then need to check whether the fan is normal.
b. It need Periodically to clean the light
out and in optical lens and the reflector’s. put out for the optimization lighting
effect, clean time need to see the lights operating frequency and the using of the surrounding environment, using the
soft cloth or general glass cleaning products to clean. Suggest clean the external optical system every 20 day, at least
clean the internal optical system every 60 days.
c. Please don’t to use the alcohol etc organic solvent clean the out shell, in case it is damaged.
Statement
a . When the products manufactured, They are good performance, complete packaging . All users should comply with
the warnings and instructions stated above . Any damage caused by misuse is not within the scope of the company's
warranty . Operation manual of neglect caused problems and the fault is not in the dealer is responsible within the
scope of Neglect operation manual due to problem is out of dealer responsibility .
b. This handbook stated related matters explanation right belongs to our company .
This lamp use 3 core XLR plug((plug seat). If use 3 core XLR plugs (plug seat), you must use a conversion line (5
core to 3 core), as shown:The conversion of three and five core plug.
