Range Limitation
Move-in Black
Reset Control
System Default
1)Go to MENU > RANGE > P/START
2)Select the starting point for the limited pan (000~255)
3)Go to MENU > RANGE > P/FINISH
4)Select the finishing point for the limited pan (000~255)
5)Go to MENU > RANGE > T/START
6)Select the starting point for the limited tilt (000~255)
7)Go to MENU > RANGE > T/FINISH
8)Select the finishing point for the limited tilt (000~255)
9)Go to MENU > RANGE > USE
10)Select YES to activate the new settings or NO to stop using them.
1) Go to MENU > SPECIAL > BLACK
2) Select YES to enable the 3 seconds delay or NO to make the blackout immediate.
1)Go to MENU > SPECIAL > RESET
2)Select DMX to enable the DMX controller to reset the fixture (Control function) or
NO to reset the fixture only from the control panel.
1)Go to MENU > DEFAULT > DEFAULT
2)Select YES to default the fixture to its original factory settings.
--10--
Summary of Contents for MH LED 60D
Page 14: ...11...
Page 20: ...Exploded View 17...
