To clean a fixture, follow the below recommendations:
Always dry the external optics and glass surfaces carefully after cleaning them.
To maintain optimum performance and minimize wear, the user should clean the light
fixtures frequently. Usage and environment are contributing factors in determining the
cleaning frequency. As a rule, the user should clean the fixtures at least twice a
month. Dust build up reduces light output performance and can cause overheating.
This can lead to reduced light source life and increased mechanical wear.
We recommends cleaning the fixture's external optics with a soft cloth using normal
glass cleaning fluid.
Unplug the fixture from power.
Wait until the fixture is cold.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and reachable internal components.
Clean all external optics and glass surfaces with a mild solution of glass cleaner or
isopropyl alcohol, and a soft, lint free cotton cloth or a lens cleaning tissue.
Apply the solution directly to the cloth or tissue and drag any dirt and grime to the
outside of the lens.
Gently polish the external glass surfaces until they are free of haze and lint.
When cleaning units with a movable mirror, you should keep the contact with the
mirror surface to a minimum to avoid scratching or damaging it.
If the fix ture has on e or compressed air. refrain from spinning them using
compressed air.
General
Maintenance
--15--
Summary of Contents for MH LED 60D
Page 14: ...11...
Page 20: ...Exploded View 17...
