background image

Returns 

Procedure

The user must send the merchandise prepaid, in the original box, and with its original 
 packing and accessories. We will not issue call tags. 

Call us and request a Return Merchandise Authorization Number (RMA #) before 
shipping the fixture. Be prepared to provide the model number, serial number and 
a brief description of the cause for the return. 

The user must clearly label the package with a Return Merchandise Authorization 
Number (RMA #). We will refuse any product returned without an RMA #. 

DO NO T write t he RMA # directly on t he b ox. Instead, write it o n a properly 
affixed label. 

Claims

For other issues such as missing components or parts, damage not related to shipping, 
or concealed damage, the customer must make claims to us within seven (7) days of
receiving the merchandise. 

Once you are given an RMA #, please include the following information on a piece of 
paper inside the box: 
•     Your name 
•     Your address 
•     Your phone number 
•     The RMA # 
•     A brief description of the symptoms 

 

Be sure to pack the fixture properly. Any shipping damage resulting from inadequate 
packaging will be the customer's responsibility. As a suggestion, proper UPS packing 
or double-boxing is always a safe method to use. 

We reserves the right t o u se it s own discretion t o repair o r replace returned 
product(s). 

The carrier is responsible for any damage incurred during shipping. Therefore, if the 
received merchandise appears to have damages caused during shipping, the customer 
must submit the damage report and any related claims with the carrier, not ours. 
The customer must submit the report upon reception of the damaged merchandise.
 Failure to do so in a timely manner may invalidate the customer's claim 
with the carrier. 

--19--

 

Technical Specifications

Weight & Dimensions  
Length................................................................................................................................. 11.4 in (290 mm) 
Width .................................................................................................................................. 11.6 in (295 mm) 
Height ................................................................................................................................. 19.1 in (485 mm) 
Weight ................................................................................................................................... 30 l bs (13.6 kg) 

 

Power  
Auto-ranging ................................................................................................................. 100~ 240 V, 50/60 Hz 
Power Consumption @ 120 V, 60 Hz .............................................. 150 W , 1.2 A (operation), 0.1 A (inrush) 
Power Consumption @ 240 V, 50 Hz .............................................. 145 W , 0.6 A (operation), 0.1 A (inrush) 

 

Light Source  
LED ................................................................................................ ................................. 60 W, 50,000 hours 
Quantity ........................................................................................................................................................ 1 

 

Photo Optic  
Luminance at 2 m ............................................................................................................................ 5,400 l ux 
Beam angle .............................................................................................................................................. 15° 

 

Control & Programming

 

Data input ...................................................................................................... locking 3-pin XLR male socket 
Data output ................................................................................................. l ocking 3-pin XLR female socket 
Data pin configuration .................................................................................... pi n 1 shield, pin 2 (-), pin 3 (+) 
Protocols............................................................................................................................ USITT DMX512-A  
DMX Channels ............................................................................................................................... 11 and 14  

 

 

 
 
 
 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for MH LED 60D





























Reviews: