Hosen MH LED 60D, User Manual

Safety

Notes

Operation 

Expected LED 

Lifespan

Please  read  the  following  notes  carefully  because  they  include  important  
safety information about the installation, usage and maintenance of this product.
It is important to read all these notes before starting to work with this product.

There are no user serviceable parts inside the light. Any reference to servicing this unit 
you may find from now on in this User Manual will only apply to properly C we certified 
technicians. Do not o pen the housing or attempt any repairs unless you are one of them. 

Please refer to all applicable local codes and regulations for proper installation 
of the light. 

Keep this manual for future consultation. If you sell the light  to another user, make 
sure that they also receive this manual. 

Personal 
     Safety 

     Mounting 
and Rigging

Power 

 and Wiring 

 Avoid direct eye exposure to the light source while the fixture is on. 
 Always disconnect the light  from its power source before servicing. 
 Always connect the light  to a grounded circuit to avoid the risk of electrocution. 

 This product is for indoor use only! To prevent risk of fire or shock, do not expose 

this product to rain or moisture. 

 Make sure there are no flammable materials close to the fixture(s) while operating. 
 When hanging this fixture, always secure it to a fastening device using a safety

 cable (not provided). 

 Always make sure that you are connecting the light  to the proper voltage, as per the 

specifications in this manual or on the product's sticker. 

 Never connect the light to a dimmer pack. 
 Make sure that the power cable is not cracked, crimped or damaged. 
 Never disconnect the fixture by pulling or tugging on the power cable. 

 The maximum ambient temperature (Ta) is 104  F (40

 C). Do not operate the 

     fixture at a higher temperature. 

 In case of a serious operating problem, stop using this product immediately! 

In t he unlikely e vent t hat your light may require ser vice, please contact our Technical 
Support. 

LEDs gradually decline in brightness over time, mostly because of heat. Packaged in 
clusters, LEDs exhibit higher operating temperatures than in ideal or singular optimum 
conditions. For this reason, using all color .LEDs at their fullest intensity significantly 
reduces the LEDs' lifespan. Under normal conditions, this lifespan can be of 40,000 to 
50,000 hours. If extending this lifespan expectancy is vital, lower the operational 
temperature by improving ventilation and reducing the external temperature , as well 
as limiting the overall projection intensity 

--2--