10
Data
(
-
)
signal
Pin
2
Pin
2
Data
(
+
)
signal
Pin
3
Pin
3
Do not us
e Do not use
Do not use Do not use
Setting up a DMX Serial Data Link
1. Connect the (male) 3 pin connector side o
f
the DMX cable to the output (female) 3 pi
n
connector of the controller
.
2. Connect the end of the cable coming from
the controller which will have a (female) 3
pin connector to the input connector of the
next fixture consisting of a (male) 3 pin connector.
3. Then, proceed to connect from the outpu
t
as stated above to the input of the followin
g
fixture and so on
.
DMX Data Cables
11
Order Code Descriptio
n
DMX1.5 DMX Cable 1.5m/4.9f
t
DMX4.5 DMX Cable 4.5m/14.8f
t
DMX10 DMX Cable 10m/32.8f
t
Universal DMX Controller
