4
Not all fixtures have a voltage switch,
please be sure to connect to the proper voltage
2. Introduction
Features
CONTROL FEATURES
4/12-channel DMX-512 LED moving yoke
Pan: 540
°
/ tilt: 180
°
RGB color mixing
Variable electronic strobe
Variable electronic dimmer (0 -100%)
Vector speed channel for pan/tilt, RGB color mixing and color
macros
Built-in movement macros via master/slave or DMX
ADDITIONAL FEATURES
User-selectable basic or advanced operating modes
User-electable pan/tilt ranges
Pan:540°,360°,180°
Tilt:180°,90°
17
1) Use standard DMX cables to daisy chain your
units together via the DMX connector on the rear
of the units. Proper performance it may be
necessary to use a terminator at the last fixture. For
more information about terminators, see page 8.
2) Choose a unit to function as the Master. Select
NAFA/NASL or NStS (see below for readout)
depending upon which master mode you require.
The master unit must be the first unit in line.
Finally, chain the units together using DMX
cable.
Master Auto
or
nASL
Master Sound
n5t5
becomes
when confirmed
3) Select slave function by using the Up/Down
keys to reach SLAv in the Master/Auto menu on
the slave units, and they will react in the same as
the Master.
Slave
becomes
when confirmed
