28
28
E2AH5820209
E2AH5820209
3. GEAR MOTOR
3. GEAR MOTOR
After the following hours of operation, check the Gear Motor for excessive noise caused by
After the following hours of operation, check the Gear Motor for excessive noise caused by
increased torque or deterioration of mechanical parts.
increased torque or deterioration of mechanical parts.
Bearing, Gear and other mechanical parts:
Bearing, Gear and other mechanical parts:
10,000 hours
10,000 hours
Oil seal:
Oil seal:
5 years
5 years
Note:
Note: When the output shaft oil seal is exposed to a large amount of water at one time, water
When the output shaft oil seal is exposed to a large amount of water at one time, water
may enter the Gear Case. Always drain the water circuit before removing the Auger
may enter the Gear Case. Always drain the water circuit before removing the Auger
for service.
for service.
4. CONDENSER
4. CONDENSER
Check the Condenser once a year, and clean if required by using a brush or vacuum cleaner.
Check the Condenser once a year, and clean if required by using a brush or vacuum cleaner.
More frequent cleaning may be required depending on the location of the icemaker.
More frequent cleaning may be required depending on the location of the icemaker.
5. AIR FILTER (AIR-COOLED MODEL ONLY)
5. AIR FILTER (AIR-COOLED MODEL ONLY)
A plastic mesh Air Filter removes dirt or dust from the air, and keeps the Condenser from
A plastic mesh Air Filter removes dirt or dust from the air, and keeps the Condenser from
getting clogged. As the Filter gets clogged, the icemaker’s performance will be reduced.
getting clogged. As the Filter gets clogged, the icemaker’s performance will be reduced.
Remove and clean the Air Filter at least twice per month:
Remove and clean the Air Filter at least twice per month:
1) Remove the screw, push down the Lock and take
1) Remove the screw, push down the Lock and take
off the Louver.
off the Louver.
Note:
Note: Do not put your hand inside the machine
Do not put your hand inside the machine
compartment.
compartment.
2) Remove the Air Filter by pushing it down.
2) Remove the Air Filter by pushing it down.
3) Clean the Air Filter by using a vacuum cleaner.
3) Clean the Air Filter by using a vacuum cleaner.
When severely clogged, use warm water and a
When severely clogged, use warm water and a
neutral cleaner to wash the Air Filter.
neutral cleaner to wash the Air Filter.
4) Rinse and dry the Air Filter thoroughly, and place
4) Rinse and dry the Air Filter thoroughly, and place
it in position.
it in position.
Fig. 5
Fig. 5
Exterior Panel
Exterior Panel
Lock
Lock
Screw
Screw
Louver
Louver
Air Filter
Air Filter
