31
31
E2AH5820209
E2AH5820209
3) Remove all ice from the Storage Bin to avoid contamination by the cleaner.
3) Remove all ice from the Storage Bin to avoid contamination by the cleaner.
4) Unplug the icemaker. Remove the Top and Front Panels.
4) Unplug the icemaker. Remove the Top and Front Panels.
5) Remove the Cover of the Reservoir. Remove any loose debris or scale.
5) Remove the Cover of the Reservoir. Remove any loose debris or scale.
6) Carefully fill the Reservoir with the solution to the overflow point. If necessary, use a small
6) Carefully fill the Reservoir with the solution to the overflow point. If necessary, use a small
brush to clean the inside of the Reservoir.
brush to clean the inside of the Reservoir.
7) Refit the Reservoir Cover.
7) Refit the Reservoir Cover.
8) Check that the Operation Switch is in the “RUN” position.
8) Check that the Operation Switch is in the “RUN” position.
9) Loose fit the Front and Top Panels.
9) Loose fit the Front and Top Panels.
10) Allow the icemaker to stand for about 10 minutes, then plug in the icemaker to make ice
10) Allow the icemaker to stand for about 10 minutes, then plug in the icemaker to make ice
with the solution.
with the solution.
11) With the water supply tap open, allow the machine to continue icemaking for a further 20
11) With the water supply tap open, allow the machine to continue icemaking for a further 20
minutes. Open the Access Flap and press the Stop Button.
minutes. Open the Access Flap and press the Stop Button.
12) Allow time for the Gear Motor to stop and the water system to drain.
12) Allow time for the Gear Motor to stop and the water system to drain.
13) Unplug the icemaker.
13) Unplug the icemaker.
14) Refit the Top and Front Panels. Plug in the icemaker.
14) Refit the Top and Front Panels. Plug in the icemaker.
15) Allow the icemaker to make ice for approximately 10 minutes.
15) Allow the icemaker to make ice for approximately 10 minutes.
16) Pour warm water into the Storage Bin to melt any ice down the drain.
16) Pour warm water into the Storage Bin to melt any ice down the drain.
Note:
Note: 1. If the machine has heavy deposits of scale, repeat the complete cleaning procedure.
1. If the machine has heavy deposits of scale, repeat the complete cleaning procedure.
2. Do not increase the proportion of cleaning solution to shorten cleaning times, as this
2. Do not increase the proportion of cleaning solution to shorten cleaning times, as this
may lock the Auger when completing item 10).
may lock the Auger when completing item 10).
<STEP 3>
<STEP 3>
Note:
Note: Sanitising should always be completed after cleaning or alternately as an individual
Sanitising should always be completed after cleaning or alternately as an individual
procedure if conditions exist to make it necessary.
procedure if conditions exist to make it necessary.
Use 2.8 lit. of the sanitising solution to sanitise the icemaker.
Use 2.8 lit. of the sanitising solution to sanitise the icemaker.
17) Follow items 1) to 16) to complete sanitisation of the water system.
17) Follow items 1) to 16) to complete sanitisation of the water system.
