background image

4

 WARNING, continued

• Open and close the doors with care. Opening the doors too quickly or forcefully may 

cause injury or damage to the appliance or surrounding equipment.

• Do not use combustible spray or place volatile or flammable substances in or near 

the appliance. They might catch fire.

• Keep the area around the appliance clean. Dirt, dust, or insects in

 

the appliance 

could cause harm to individuals or damage to the equipment.

• Do not throw anything into the unit. The glass parts could be broken, which may 

result in injury.

• The appliance is designed only for temporary display of food. Employ sanitary 

methods. Use for any other purposes (for example, storage of chemicals or medical 

supplies such as vaccine and serum) could cause deterioration of stored items.

• Do not block air inlets or outlets, otherwise cooling performance may be reduced.
• Do not tightly pack the unit. Allow some space between items to ensure good cooling 

performance. Also allow space between items and interior surfaces.

• Do not put warm or hot foods in the

 

unit. Store only pre-refrigerated items, or they will 

raise the interior temperature and could deteriorate other foods in the unit or overload 

the appliance.

• Food display and handling must comply with applicable codes and regulations.

• All foods should be wrapped in plastic film or stored in sealed containers. Otherwise 

foods may dry up, pass their smells onto other foods, cause frost to develop, result 

in poor appliance performance, or increase the likelihood of cross-contamination. 

Certain dressings and food ingredients, if not stored in sealed containers, may 

accelerate corrosion of the evaporator, resulting in failure.

• Do not store items in contact with the interior bottom or the evaporator at the interior 

top. Otherwise, items may freeze up and crack or break causing a risk of injury or 

contamination of other food.

NOTICE

After servicing, follow the instructions below:
• Keep ventilation openings, in the appliance enclosure, clear of obstruction. Do not 

place  anything  on  top  of  the  appliance.  Blockage  of  airflow  could  negatively  affect 

performance and damage the appliance.

• Do not allow the appliance to bear any outside weight.
• To prevent deformation or cracks, do not spray insecticide onto the plastic parts or let 

them come into contact with oil.

• Use only the door handle when opening and closing the sliding doors.

Summary of Contents for HNC-120BE-L-BH







































Reviews: