Hoshizaki KM-1301S J-E Series Installation Manual Download

Page: 2 / 101

CONTENTS

Important Safety Information ..................................................................................................................................................2
I. Installation and Startup Instructions ....................................................................................................................................3

II. Cleaning and Maintenance Instructions ............................................................................................................................15

IMPORTANT

This manual should be read carefully before the icemaker is installed and operated. Read the warnings contained in
this manual carefully as they give important information regarding safety. Only qualified service technicians should
install, service, and maintain the icemaker. No installation, service, or maintenance should be undertaken until the
technician has thoroughly read the Installation Manual and the Instruction Manual. Likewise, the owner/manager
should not proceed to operate the icemaker until the installer has instructed them on its proper operation. Failure
to install, operate, and maintain the equipment in accordance with the Installation Manual and Instruction Manual
may adversely affect safety, performance, component life, and warranty coverage. Please retain this booklet for any
further reference that may be necessary.

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, or
damage to the unit.

WARNING

Indicates a hazardous situation which could result in death or serious injury.
CAUTION
Indicates a situation which could result in damage to the unit.
IMPORTANT
Indicates important information about the use and care of the unit.

WARNING

This icemaker should be destined only to the use for which it has been expressly conceived. Any other use should
be considered improper and therefore dangerous. The manufacturer cannot be held responsible for injury or damage
resulting from improper, incorrect, and unreasonable use.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions
including the following:

• Hard-wired electrical connection is recommended. Electrical connection must meet national, state, and local

electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious
injury, fire, or severe damage to equipment.

• This unit requires an independent power supply of proper capacity. See the nameplate for electrical specifications.

Failure to use a properly sized breaker or fuse can result in a tripped breaker, blown fuses, or damage to existing
wiring. This could lead to heat generation or fire.

•

THIS UNIT MUST BE GROUNDED (EARTHED).

Failure to properly ground (earth) this unit could result in death or

serious injury.

• Turn off the power supply before any maintenance, repairs, or cleaning is undertaken.
• This unit should be disassembled or repaired only by qualified service personnel to reduce the risk of electric

shock, injury, or fire.

• Do not make any alterations to the unit. Alterations could result in electric shock, injury, fire, or damage to the unit.