40
Drain Pan
Tab
N
3. DRAIN PAN, STORAGE BIN, FRONT PANEL
1) Follow the steps 1) to 2) in “III. 2. PREPARING THE ICE DISPENSER FOR LONG
STORAGE”.
2) Unplug the ice dispenser.
3) Pull out the drain pan hose from the drain hole in the storage bin.
4) Remove the thumbscrew at the front and take out the drain pan from the storage bin.
5) Soak the drain pan in warm water containing a neutral cleaner for at least 3 minutes.
Rinse thoroughly with clean water.
6) Wipe the backside of
the front panel with a damp cloth containing a neutral cleaner.
Use a clean damp cloth to wipe off the cleaner.
7)
Wash the storage bin liner with clean water.
8)
Refit the drain pan and front panel
in their correct position.
Run the bin control switch lead through the recess in the drain
pan.
4. ICE STATION, DRAIN TRAP
1) Lightly lift the cap at the center of the ice station and
turn it counterclockwise.
2) Lift the cap straight off.
3) Soak the cap in warm water containing a neutral cleaner
for at least 3 minutes. Rinse thoroughly with clean water.
4) Wipe the notches in the ice station with a damp cloth
containing a neutral cleaner. Use a clean damp cloth to
wipe off the cleaner.
5)
Refit the cap in the ice station by fitting the tabs in the
notches.
6) Turn the cap tightly clockwise.
Bin Control
Switch Lead
Recess
Fig. 3
Cap
Ice Station
Fig. 4
otch
Fig. 5
NOTICE
After cleaning, be sure to place the air filter back in position.
