background image

Mini Lady Hi-Carb Chiller 

240V / 50Hz  

 

 

lancerbeverage.com

 

Page 6 of 11 

 
Hoshizaki Lancer reserve the right to change specifications without notice 

No 005 – 26 October 2010 

6. Recommendations 

6.1 Advices 

Before using this machine, carefully read this entire instruction manual. 

 

The operator must fully comprehend the information and prescriptions contained herein, which are 

essential for a correct use of the machine. The interventions carried out by the operator on the 

machine are allowed only within the limits of his competence and the scope of previous training. 

 

The machine has been designed and built with mechanical and electrical safety devices, suitable for 

protection against possible physical injuries. The operator must be fully aware of the operation 

mechanisms of the machine as far as within his competence. Although the machine is equipped with 

these safety devices, the operator must be aware of the potential risks that exist while operating the 

machine. 

 

It is the buyer’s responsibility to ensure that the users are trained and fully aware of all the 

information and prescriptions contained in the documentation supplied. 

 

Only original spare parts guarantee the functional reliability and optimisation of the machine’s 

performance. Any modifications to the machine carried out by the operator shall be considered as 

his total responsibility. 

 

The operator is responsible for all the operations necessary to maintain the machine in good working 

order, before and during its use. 

 

7. General 

Information 

7.1  Description of the Machine 

The machine is composed of a refrigerator housed in a metal casing, which protects the moving 

parts. All the machine’s openings are fitted with plastic or metal grids fastened with clamping screws 

or joints. 

7.2 Proper 

uses 

The machine is used to refrigerate premix beverages (beer, wine and soft drink) and to their 

distribution by means of suitable connections with steel or food plastic pipes. 

7.3 Improper 

uses 

The machine is not intended for any use other than that specified in point 7.2.  Do not use the 

machine for non-food liquids. The machine has not been designed to operate in excessive humidity, 

outside or in an explosive atmosphere; it is therefore strictly forbidden to install or use the machine in 

such conditions. 

Summary of Contents for Lancer Mini Lady












Reviews: