10
B. Checks Before Installation
1. Icemaker
IMPORTANT
1. Install in accordance with all applicable national, state and local regulations.
. Ensure all components, fasteners and thumbscrews are securely in place after
installation.
3. This icemaker is designed for dispensers 30" wide or wider. If using a storage
bin, the recommended storage bin is HOSHIZAKI ICE STORAGE BIN, Model
B-500 series.
1) Unpack the icemaker. Remove all shipping cartons, tape and packing. If packing
material is left in the icemaker, it will not work properly.
) Remove the panels to prevent damage when installing the icemaker. (See "C. How to
Remove Panels.")
3) Remove the protective plastic film from the panels. If the icemaker is exposed to the
sun or to heat, remove the film after the icemaker cools.
4) Remove the package containing the accessories from the icemaker.
5) Check the unit to insure that the refrigerant lines do not rub or touch lines or other
surfaces.
6)
This icemaker is designed for connection to HOSHIZAKI CONDENSING UNIT,
Model SRK-13H or SRK-13H3 only!
NOTE: CONNECTION TO ANOTHER CONDENSING UNIT WILL VOID
WARRANTY.
• The maximum line length is 55 feet.
Note: If the recommended guidelines of the installation are exceeded, the icemaker
performance may be reduced.
Air
Air
Minimum 4" Clearance
Fig. 1
