HotBrick Network Solutions
Advanced PPTP
This screen is only useful if using the PPTP connection method.
Figure 3-4: Advanced PPTP
Settings – Advanced PPTP
Select WAN Port
Select the desired Port, and then click the "Select" button. The data for the
selected Port will then be displayed in the
WAN IP Account
section.
PPTP MTU
– Maximum transfer unit for PPTP. The default value is 1456.
WAN IP Account
•
User Name
– The PPTP user name (login name) assigned by your ISP.
•
Password
– The PPTP password associated with the
User Name
above.
This is assigned by your ISP, and used to login to the PPTP Server.
•
Verify Password
– Re-enter the PPTP password assigned by your ISP.
•
Server IP Address
– Enter the IP address of the PPTP Server, as
provided by your ISP.
•
Static IP Address
– If you have a fixed IP address, enter if here.
Otherwise, this field should be left at 0.0.0.0.
Action
Use the "Connect" and "Disconnect" buttons to establish or terminate a
connection on this session, if required.
Connection
Status
This displays the current connection status.
Page 24
Summary of Contents for VPN 800/2
Page 1: ...Dual WAN Firewall Router VPN 800 2 User s Guide HotBrick Network Solutions ...
Page 2: ......
Page 55: ...HotBrick Network Solutions IPSec Global Setting Figure 6 1 IPSec Global Setting Page 51 ...
Page 57: ...HotBrick Network Solutions Policy Setup Policy Setup Figure 6 2 Policy Setup Page 53 ...
