User Manual: HotDog
TM
Patient Warming System Controller
Page 6
PROPER USE AND MAINTENANCE
DO NOT
continue to use the HotDog Patient Warming Blanket beyond the labeled
expiration date
DO NOT
continue to use the HotDog Patient Warming Mattress beyond the labeled
expiration date
Do not open the HotDog Controller. There are no user serviceable parts. If service is required,
contact Technical Support (see
page 17
). The manufacturer assumes no responsibility for the
reliability, performance, or safety of the HotDog Patient Warming System if the following
events occur:
The Controller is disassembled or serviced by an unauthorized person.
The Patient Warming System components are used in a manner other than described in the
User Manuals.
The Controller is installed in an environment that does not meet the appropriate electrical
and grounding requirements.
The Controller is grounded and should not be attached to an un-grounded table intended for
use with a hyfrecator or equivalent devices.
INITIAL SETUP & ASSEMBLY
Contents
The following components are included in the HotDog Controller box:
1—HotDog Controller Model WC5X
1—IV pole adapter and mounting hardware
1—Mains power cord
1—CD containing User Manual and Service Manual
1—HotDog Warming Blanket Cable (P/N A101)
Reusable HotDog accessories (e.g., Warming Blankets, Warming Mattresses, connecting
cables, OR table/gurney rail hooks) and HotDog Disposable Sheets are sold separately.
