User Manual: Hot Dog Veterinary Patient Warming System Controller
Page 15
DEFINITION OF PRODUCT SYMBOLS
Do Not Place Under Patient
This Side Up
Mains Power On
Indicator
This Side Down
Heating Area
Alarm
Attention, consult
accompanying documents
Reference Number
Lot Number
BF Patient Applied Part
according to IEC60601-1.
Serial Number
Manufacture Date
Temperature in Range
Transport and storage
temperature range
Temperature
Adjustment
Keep Dry
Transport and storage
humidity range
Fuse
Equipotential
EU Authorized
Representative
Return to Authorized
Representative
Temperature Sensor
Do not use after
YYYY-MM
Manufacturer
IPX2
Protected against dripping water when tilted up to 15°; Vertically dripping water shall have no harmful effect
when the enclosure is tilted at an angle up to 15° from its normal position.
Conforms to European Medical Device Directive 93/42/EEC
Medical Equipment Classified by Intertek Testing Services NA Inc. with respect to electric shock, fire, and mechanical
hazards only, in accordance with UL 60601-1. Classified under the Medical Device Directive (93/42/EEC) as a Class IIb
device.
ACCESSORY PART NUMBERS
The following cable part numbers are used with the Hot Dog Patient Warming System:
Part Number
Description
A101
Hot Dog Warming Blanket Cable, 4m (13ft)
A101-6000
Hot Dog Warming Blanket Cable, 6m (19.7ft)
