25
HOW TO USE THE EQUIPMENT SETTINGS MODE
1. Access the settings main menu.
Insert the key
into the con-
sole (see HOW
TO TURN ON
THE POWER
on page 18).
Next, select
the main menu
(see step 2 on
page 20). Then, draw a square clockwise on the
screen to access the settings main menu (see the
drawing above).
2. Select the equipment settings mode.
In the settings main menu, touch the Equipment
Settings button.
3. Select a language.
To select a language, touch the Language button
and select the desired language. Then, touch the
back button on the screen to return to the equip-
ment settings mode. Note: This feature may not be
enabled.
4. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Change the unit of measure-
ment, if desired. Then, touch the back button on
the screen.
5. Select a timezone.
Touch the Timezone button. Select your local time-
zone to have the console sync to your local time.
Then, touch the back button.
6. Select an update time.
To select a time for automatic console updates,
touch the Update Time button and select the
desired time. Then, touch the back button on the
screen.
IMPORTANT: You must still unplug the power
cord after using the incline trainer. Set the
update time for a time when you normally
use the incline trainer and will be available to
unplug the power cord after an update.
7. Turn on or turn off the display demo mode.
The console features a display demo mode,
designed to be used if the incline trainer is dis-
played in a store. While the demo mode is turned
on, the console will function normally when you
plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
screen will show a demo presentation.
To turn on or turn off the display demo mode, first
touch the Demo Mode button. Next, touch the On
checkbox or the Off checkbox. Then, touch the
back button on the screen.
8. Enable or disable the key.
Note: This feature may not be enabled on your
incline trainer.
You can disable the key so that the incline trainer
does not require the use of the key, if desired.
Touch the Safety Key button. To disable the key,
touch the Disable checkbox. CAUTION: Read the
safety warning on the screen before disabling
the key. To enable the key again, touch the Enable
checkbox.
9. Enable or disable the Internet browser.
To enable or disable the Internet browser, first
touch the Browser button. Next, touch the Enable
checkbox or the Disable checkbox. Then, touch the
back button on the screen.
10. Enable or disable the street view.
During some workouts, the screen may show a
map. To enable or disable the street view feature of
the maps, first touch the Street View button. Next,
touch the Enable checkbox or the Disable check-
box. Then, touch the back button on the screen.
11. Set a workout time limit.
You can set a time limit for workouts to help restrict
the amount of time each user spends on the incline
trainer.
Touch the Workout Time Limit button. To enable
the workout time limit, touch the Enable checkbox.
Then, touch the increase and decrease buttons to
select the amount of time allowed for each user.
Then, touch the back button on the screen.
