24
HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to access usage information and to view and
change default settings.
1. Press any button or begin pedaling to activate
the console.
See HOW TO ACTIVATE THE CONSOLE on page
12.
2. Hold down the CLEAR button and the ENTER
button simultaneously for a few seconds to
select the maintenance mode.
When the maintenance mode is selected, the
words “MAINTENANCE MODE SCREEN 1” will
appear in the main display.
Note: As you view the maintenance mode screens,
press the BACK button at any time to return to the
previous screen.
3. View usage information for the exercise cycle.
When the words “MAINTENANCE MODE
SCREEN 1” appear, the main display will show the
total number of hours that the exercise cycle has
been used and the total distance that the exercise
cycle has been pedaled.
4. Press the DISPLAY button and change the time
settings if desired.
When the words “MAINTENANCE MODE
SCREEN 2” appear, the main display will allow you
to set a maximum program time for the programs
and a default time for the pause timeout.
The maximum program time for the programs can
be from 10 minutes to 90 minutes. To change the
maximum program time, press the increase and
decrease buttons beside the ENTER button. Then,
press the DISPLAY button.
If the pedals on the exercise cycle do not move for
a period of time, a pause timeout will occur and the
console will enter an idle mode. When the console
is in the idle mode, the displays will be reset to
zeros and a screen saver will appear in the main
display.
The pause timeout can occur from 1 minute to 5
minutes after the pedals stop moving. To change
the length of time that will elapse before the pause
timeout, press the increase and decrease buttons
beside the ENTER button.
5. Press the DISPLAY button again and change
the console settings if desired.
When the words “MAINTENANCE MODE
SCREEN 3” appear, the main display will allow you
to set a default input and a default volume level.
You can set the default input for the console as
MP3, TV, or RCA. To change the default input,
press the increase and decrease buttons beside
the ENTER button. Then, press the DISPLAY but-
ton. Note: The TV and RCA input options are for
use with the optional Workout TV (see page 10).
The console has seven volume levels. To change
the volume level, press the increase and decrease
buttons beside the ENTER button.
6. Press the DISPLAY button again and select a
language for the main display.
The main display may be able to display text mes-
sages in English, International English, German,
Spanish, Italian, or French. To change the lan-
guage, press the increase and decrease buttons
beside the ENTER button. Then press the DIS-
PLAY button.
7. Press the DISPLAY button again and change
the settings for a custom program if desired.
When the words “MAINTENANCE MODE
SCREEN 4” appear, the main display will allow you
to select and change the settings for a custom pro-
gram.
To change the settings for a custom program, see
HOW TO CREATE A CUSTOM PROGRAM on
page 19.
8. Press the DISPLAY button to exit the mainte-
nance mode.
