8
6
5
6. Attach the Rear Stabilizer Cover (5) to the
Stabilizer Bracket (86) with two M8 x 60mm
Screws (88).
Attach the Stabilizer Block (90) to the Stabilizer
Bracket (86) with two M4 x 15mm Screws (52).
65
35
32
99
88
86
52
52
90
88
5. Identify the Right Handlebar (35), which is
marked with an “R” sticker.
Attach the Right Handlebar (35) to the Right
Handlebar Leg (32) with two M8 x 40mm Bolts
(65) and two M8 Acorn Nuts (99).
First, tighten
the Bolts completely into the Right
Handlebar and the Right Handlebar Leg.
Using the hex key, hold the Bolts firmly
against the Right Handlebar and then tighten
the Acorn Nuts onto the ends of the Bolts.
Attach the Left Handlebar (not shown) to the
Left Handlebar Leg (not shown) in the same
way.
5