04 Troubleshooting
Error
Slow inflation speed
Inflation failure after
power-on
The display shows E01
1. Check whether the air compressor's battery level is
sufficient.
2. Check whether the air hose is leaking.
3. Check whether both ends of the air hose are securely
connected.
4. Check whether the item that is being inflated is leaking.
1. Check whether the air compressor's battery level is
sufficient.
2. Check whether the current tire pressure exceeds the
preset one.
Solution
Failure to increase or
decrease the preset
pressure
Make sure the air compressor is set to the correct mode.
Select the free mode with no icon ON to adjust the
preset value within a range of 3 - 150 psi.
Normal inflation but
the pressure displays zero
The pressure of low-pressure inflatables including
balloons is too low to be measured.
Air compressor power-off
after connecting the air
hose to a valve
Press and hold the “Power/start-stop key” button to
power on the air compressor again.
Make sure the air hose is securely connected.
Air leakage when
connecting the air hose
The voltage from USB connector is abnormal. Please use a
5V charger.
Different color of the
battery level indicator when
inflating and on standby
The lithium battery's voltage level significantly drops when
discharging power, causing the battery level indicator to
have a different color when inflating compared with
standby state. This is normal.
29
