Wireless Room Thermostat
HTW-31-WKT13-WF
-
Press the
SET
button . The hour display (top left in the display) flashes.
-
Change this value using the
+
and
–
buttons.
-
Press the
SET
button. The day display (top left in the display) will flash as a number.
-
Change this value using the
+
and
–
buttons. Use 1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for
Thursday, 5 for Friday, 6 for Saturday and 7 for Sunday.
Code Pairing
-
I. Code Pairing with Sender
1) Long press the code pairing button on the receiver until LED 2 is flickering quickly.
2) Turn off sender, and long press
SET
button until the code shows on the screen, then press
+
button again.
3) Wait for a while, LED 2 stop flickering. Code pairing done.
II. Code Pairing with App
1) Scan the QR code, and download
“Smart Life” APP from google play or app store
2) Install app and register account
3) Add device by press + button at top right corner
4) Press
“ Home Applicanes II”
5) Find
“ Thermostat or Heater” on the list and press
6) Long press Pairing button(F) on receiver to enter wifi connection mode, the LED will flash quickly.
7) Press
“Confirm indicator rapidly blink” on phone.
8) Wait a moment till connection done. The LED on receiver will stop flashing. Wifi connection success.
If the LED still flash slowly, the connection fail, please try again from step. 5.
III. Clear all pairing
Long press both code pairing button and On/Off button for 5s, until LED1 and LED2 light.
And then light off, which mean the code pairing are eliminate.
IV. Signal Lost
In case the RF and WIFI signal lost/disconnected, LED 2 will flicker slowly.
Open Window Detection
Code pairing button
Heating on indicator (LED 1)
Power indicator (LED 2)
On/off button
