Programmable Multi-Stage Smart Thermostat
Reference No.:
HTW-MT08 Series
- 5 -
Version 2020-1.0
******************************Check Thermostat Operation******************************
ON/OFF operation
Press Power button
to turn the thermostat on/off.
Working Mode Operation
Press
to set the thermostat working mode in
Permanent Hold, Using Schedule
or
Temporary Hold
. These functions
will appear on the screen.
Permanent Hold
=Manual Mode. In this mode, press
to set temperature manually.
Temporary Hold
. when you change the temperature setting to a different temperature and it stays at that setting until the next
schedule change
Using Schedule
. 7 day separate four periods daily programmable
Holiday Mode
. Changes temperature setting for a designated number of days.
Real Time Setting
Press and hold
for 5 sec. till the min of time flashes; press
to set to set your minute.
Then press
switch to the “hour” and “week day” setting respectively, press
to set the values.
Programmable Schedule Setting
After the above time setting, touch the icon
each week day”1 2 3 4 5 6 7” will show along the top of the screen.
press
to set the time for the 1st period(Awake). Press the icon
then use the
arrows to set the temp. for
the 1st period. Repeat this process for periods 2-4. Default values set as below:
Schedule Period
Time
Set-Points
Heat
Cool
Wake
6:00 Am
72
℉
(22
°C
)
72
℉
(22
°C
)
Leave
8:00 Am
72
℉
(22
°C
)
72
℉
(22
°C
)
Return
11:30 Am
72
℉
(22
°C
)
72
℉
(22
°C
)
Sleep
01:30 Am
72
℉
(22
°C
)
72
℉
(22
°C
)
System Mode Operation
Press
to select the mode AUTO,COOL,HEAT,OFF,EMER.
HEAT — Thermostat controls the heating system.
OFF — Both heating and cooling systems are off.
COOL — Thermostat controls the cooling system.
AUTO — Thermostat automatically changes between heating and cooling operation, depending on indoor temperature.
EMER — Emergency heat cycles to maintain temperature.
