Smart Wifi Thermostat
Reference No.:HTW-WF02 Series
- 3 -
Version 2020-1.0
Buttons/Functions
Operation
Switch thermostat power On or Off
Increase or decrease set-point or parameters
Set the time and weekday:
Touch this icon to set Minute/Hour and Weekday (1 = Monday, 2 = Tuesday etc.)
Increase or decrease parameters by using the arrow icons.
Press once more to confirm and switch to next relevant parameter setting.
Lock/Unlock
Press these 2 buttons simultaneously and hold for 5 seconds to lock/unlock
thermostat.
Notes: In parameter 3 of ISU process, Full/Half lock configurable.
M
Switch between Manual and Programmable mode
In manual mode, this icon appears in the button left display
In programmable mode, the period icon appears in the right side.
Notes: In programmable mode, the Temperature and Time can not be adjusted
Programmable
Schedule
Configuration
(5+2 weekly)
1.Press M button switch working mode to Programmable mode.
2.Set the time and weekday:
Touch this icon to set Minute>Hour> Weekday (1 = Monday, 2 = Tuesday etc.)
Increase or decrease parameters by using these icons .
Press once more to confirm and switch to next relevant parameter setting.
3. Touch the icon again to set the weekday schedule [settings appear (1 2 3 4 5)
will show along the top of the screen].
Likewise, use and becomingly to adjust the time/temperature for the 1-6
period per day.
Repeat the above process to set the weekend schedule. Press once more to
confirm and exit.
Ex-factory Default Settings
Time display
WEEKDAY (MON. – FRI.)
WEEKEND (SAT. – SUN.)
TIME
TEMP.
TIME
TEMP.
Period 1 (Comfort)
06.00 waken
20°C
06.00 waken
20°C
Period 2 (Economy)
08.00 leave
15°C
08.00 leave
20°C
Period 3 (Comfort)
11.30 home
15°C
11.30 home
20°C
Period 4 (Economy)
13.30 leave
15°C
13.30 leave
20°C
Period 5 (Comfort)(1+2)
17.00 home
22°C
17.00 home
15°C
Period 6 (Economy)(3+4) 22.00 bed
15°C
22.00 bed
15°C
Floor Temperature
Display
Press and hold the for 5 sec. to display the temp. of floor sensor(if connected).
Notes: During the thermostat in wifi connected status, it runs the programmable schedule process made from APP prior to that of
thermostat. i.e. The programmable schedule only can be carried out if there is no Wifi connection between thermostat and
smartphone/tablet PC.
Operation
