EN
7
TEMPERATURE
button
WASH CYCLE
SELECTOR
knob
OPTION
buttons
with indicator lights
LOCK
indicator light
START/
PAUSE
button with
indicator light
WASH
CYCLE
PHASE
icons
CONTROL PANEL
LOCK
button with
indicator light
Button with
ON/OFF
indicator light
ECO
indicator light
OPTION
buttons
with indicator lights
Control panel
Button with
ON/OFF
indicator light: press this briefly
to switch the machine on or off. The green indicator light
indicates that the machine is switched on. To switch off
the wasdher-dryer during the wash cycle, press and hold
the button for approximately 3 seconds; if the button is
pressed briefly or accidentally the machine will not switch
off. If the machine is switched off during a wash cycle, this
wash cycle will be cancelled.
WASH CYCLE SELECTOR
knob: may be turned in
either direction. To select the most suitable wash cycle,
please refer to the
“Table of wash cycles”.
The knob will not move during the wash cycle.
TEMPERATURE
button: press to modify or exclude
the temperature setting; the value selected will appear
on the display above
(see “How to run a wash cycle or a
drying cycle”).
DRYING
button
:
press to decrease or exclude drying;
the selected drying level or time will appear on the display
(see “How to run a wash cycle or a drying cycle”).
DELAYED START
button: press to set a delayed start
for the selected wash cycle; the set delay time will appear
on the display above
(see “How to run a wash cycle or a
drying cycle”).
OPTION
buttons with indicator lights: press to select the
available options. The indicator light corresponding to the
selected option will remain lit
(see “How to run a wash
cycle or a drying cycle”).
WASH CYCLE PHASE
icons: these illuminate to indicate
the progress of the wash cycle (Wash
– Rinse –
Spin/Drain
– Drying
). The text
lights up when the
cycle is complete.
START/PAUSE
button with indicator light: when the green
indicator light flashes slowly, press the button to start a
wash cycle. Once the cycle has begun the indicator light
will remain lit in a fixed manner. To pause the wash cycle,
press the button again; the indicator light will flash in an
orange colour. If the “LOCK” indicator light is switched
off, the door may be opened. To start the wash cycle from
the point at which it was interrupted, press the button
again.
LOCK
indicator light: indicates that the porthole door is
locked. To open the door, pause the wash cycle (see “
How
to run a wash cycle or a drying cycle
”).
CONTROL PANEL LOCK
button with indicator light:
to activate or deactivate the control panel lock, press and
hold the button for approximately 2 seconds. when the
indicator light is illuminated, the control panel is locked
(apart from the ON/OFF button). This means it is possible
to prevent wash cycles from being modified accidentally,
especially where there are children in the home.
ECO
indicator light: the
icon lights up when, after
altering the washing parameters, an energy saving of
at least 10% is made. Furthermore, before the machine
enters “Standby” mode, the icon will light up for a few
seconds; when the machine is switched off the estimated
energy saving will be around the 80% mark.
DELAYED
START
button
DISPLAY
DRYING
button