GB
1
9
U
s
in
g
t
he h
o
b
L
i
gh
t
in
g
t
he
b
ur
n
ers
For each BURNER knob there is a complete ring
showing the strength of the flame for the relevant
burner.
To light one of the burners on the hob:
1. Bring a flame or gas lighter close to the burner.
2. Press the BURNER knob and turn it in an
anticlockwise direction so that it is pointing to the
ma
x
imum flame setting
-
.
3. Adjust the intensit
y
of the flame to the desired
level b
y
turning the BURNER knob in an
anticlockwise direction. This ma
y
be the minimum
setting
+
, the ma
x
imum setting
-
or an
y
position in
between the two.
If the appliance is fitted with
an electronic lighting device*
(
see figure
), press the ignition
button, marked with the
s
y
mbol
, then hold the
BURNER knob down and turn
it in an anticlockwise direction,
towards the ma
x
imum flame setting, until the burner
is lit.The burner ma
y
be e
x
tinguished when the knob
is released. If this occurs, repeat the operation,
holding the knob down for a longer period of time.
If the flame is accidentall
y
e
x
tinguished, switch off
the burner and wait for at least 1 minute before
attempting to relight it.
If the appliance is equipped with a flame failure
safet
y
device*, press and hold the BURNER knob
for appro
x
imatel
y
2-3 seconds to keep the flame
alight and to activate the device.
To switch the burner off, turn the knob until it
reaches the stop position
.
P
r
a
c
ti
c
al
advi
c
e
on
u
sing
the
b
ur
ne
r
s
For the burners to work in the most efficient wa
y
possible and to save on the amount of gas
consumed, it is recommended that onl
y
pans that
have a lid and a flat base are used. The
y
should also
be suited to the size of the burner.
S
t
a
r
t
-
up
a
n
d
u
se
Burner
ø Cookware diameter (cm)
Fast (R)
24 - 26
Semi Fast (S)
16 - 20
Auxiliary (A)
10 - 14
To identif
y
the t
y
pe of burner, please refer to the
diagrams contained in the Burner and nozzle
specifications.
On the models supplied with a reducer shelf,
remember that this should be used onl
y
for the
au
x
iliar
y
burner when
y
ou use casserole dishes with
a diameter under 12 cm.
U
s
in
g
t
he
o
ve
n
Before operating the product, remove all plastic
film from the sides of the appliance.
The first time
y
ou use
y
our appliance, heat the
empt
y
oven with its door closed at its ma
x
imum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance ma
y
emit
a slightl
y
unpleasant odour caused b
y
protective
substances used during the manufacturing process
burning awa
y
.
Never put objects directl
y
on the bottom of the
oven; this will avoid the enamel coating being
damaged. Onl
y
use position 1 in the oven when
cooking with the rotisserie spit.
L
ighting
the
oven
To light the oven burner, bring
a flame or gas lighter close to
opening F (
see figure
) and
press the OVEN control knob
while turning it in an
anticlockwise direction until it
reaches the MAX position.
If the appliance is fitted with an electronic lighting
device* (see figure), press the ignition button,
marked with the s
y
mbol
, then hold the OVEN
control knob and turn it in an anticlockwise direction,
towards the MAX position, until the burner is lit. If,
after 15 seconds, the burner is still not alight,
release the knob, open the oven door and wait for at
least 1 minute before tr
y
ing to light it again. If there
is no electricit
y
the burner ma
y
be lit using a flame
or a lighter, as described above.
*
Onl
y
available in certain models.
F
All manuals and user guides at all-guides.com
