GB
9
Wash cycles and functions
Table of wash cycles
W
ash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max.
load
(kg)
Cycle
duration
W
ash
Bleach
Fabric softener
CLEAN Plus
1
Anti Stain
(1st press of the button)
40°
1400
-
5
1
Anti Stain Quick
(2nd press of the button)
40°
1200
-
4,5
2
Cottons
(1st press of the button)
: lightly soiled whites and delicate colours.
40°
(Max. 90°) 1400
9
2
Eco Cottons
60°C
(2nd press of the button)
(1)
: heavily soiled whites and
delicate colours.
60°
1400
-
9
2
Eco Cottons
40°C
(2nd press of the button)
(2)
: lightly soiled whites and
delicate colours.
40°
1400
-
9
2
Cottons
20°C
(3rd press of the button)
: lightly soiled whites and delicate
colours.
20°
1400
9
3
Synthetics
(Synths Resistant): heavily soiled resistant colours.
60°
1000
4
SPECIALS
4
Wool
(Woolmark Platinum)
(1st press of the button)
:
for wool, cashmere, etc.
40°
800
-
2
4
Delicates
(2nd press of the button)
30°
0
-
1
M
My Cycle
(Memory)
:
allows for any wash cycle to be stored.
6
Fastwash 30'
: to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
30°
800
-
-
3,5
DRYING
7
Ready to Wear
30°
1400
-
1
8
Cotton Dry
(1st press of the button)
-
-
-
-
-
6
8
Synthetics Dry
(2nd press of the button)
-
-
-
-
-
4
8
Wool Dry
(3rd press of the button)
-
-
-
-
-
2
Partials Programmes
Spin
(1st press of the button)
-
1400
-
-
-
9
Rinse
(2nd press of the button)
-
1400
-
-
9
Pump out
(3rd press of the button)
-
0
-
-
-
-
9
The duration of the wash cycles can be checked on the display
.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can
vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any
wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle “2” 60°C
(2nd press of the button).
2) Long wash cycle for cottons: set wash cycle “2” 40°C
(2nd press of the button)
.
Wash functions
!
If the selected function is not compatible with the
programmed wash cycle, the indicator light will flash
and the function will not be activated.
!
If the selected function is not compatible with another
function which has been selected previously, the indica-
tor light corresponding to the first function selected will
flash and only the second function will be activated; the
indicator light corresponding to the enabled function will
remain lit.
Timer Saver
If you select this option, the wash cycle duration will be redu-
ced by up to 50%, depending on the selected cycle, thereby
guaranteeing simultaneous water and energy saving. Use this
cycle for lightly soiled garments.
Press this button to reduce the spin speed.
Eco
The Eco function saves energy by not heating the water
used to wash your laundry – an advantage both to the en-
vironment and to your energy bill. Instead, intensified wash
action and water optimisation ensure great wash results in
the same average time of a standard cycle.
For the best washing results we recommend the usage of
a liquid detergent.
By selecting the drying function as well, an automatic
drying cycle automatically activates at the end of the wash
cycle – it too allows for saving energy, thanks to the opti-
mal combination of air temperature and cycle duration; the
display will visualise the “Eco” dryness level.
Summary of Contents for FDD 9640
