12
GB
Hob control panel
2
5
4
3
3
1
1
6
The control panel described in this manual is only a representative
example: it may not exactly match the panelon your appliance.
When using the touch control pannel panel:
•
Do not use gloves
•
Use a clean finger
•
Touch the glass smoothly
1
IN)/REDUCE(-) POWER
button - controls
the power level on every individual cooking zone
2
INCREASE (+)/ REDUCE(-) TIME
button -controls the
time of cooking on the cooking zones.
3
COOKING ZONE POWER
displays -show the power
level selected for every individual cooking zone
4
ON/OFF
button switches the appliance on and off.
5
CONTROL PANEL LOCK
button prevents accidental
changes to the hob settings and shows the control
panel has been locked
6. .
TIMER
display -shows the cookig time selected .
! For detailed information on the control panel functions
refer to
“Start-up and use”
section.
! This product complies with the requirements of the
latest European Directive on the limitation of power
c o n s u m p t i o n o f t h e s t a n d b y m o d e .
If no operations are carried out for a period of 2
minutes, after the residual heat indicator lights turn
off and the fan stops (if present), the appliance
a u t o m a t i c a l l y s w i t c h e s t o t h e . o f f m o d e . .
The appliance resumes the operating mode once the
ON/OFF button is pressed.
! Depending on the number of heaters/cooking zones on
the hob the COOKING ZONE SELECTED INDICATORS
may vary between and
Start-up and use
Setting the clock
!
The clock may be set when the oven is switched off
or when it is switched on, provided that the end time of
a cooking cycle has not been programmed previously.
1. Press the
button several times until the
icon and
the first two numerical digits on the display start to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the hour value.
3. Press the
button again until the other two digits on
the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
5. Press the
button again to confirm.
Setting the timer
!
This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the
button several times until the
icon and
the three numerical digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards “+” and “-” to adjust
the minute value.
3. Press the
button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will be
activated.
Using the oven
!
Before operating the product, remove all plastic film
from the sides of the appliance.
!
The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least half an hour. Make sure that the room is well
ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly unpleasant
odour caused by protective substances used during the
manufacturing process burning away.
1. Select the desired cooking mode by turning the
SELECTOR knob.
2. The oven begins its preheating stage and the
preheating indicator lights up.
The temperature may be changed by turning the
THERMOSTAT knob
Start-up and use
