70
PL
Rozwiązywanie problemów
Co zrobić, gdy wydaje się, że suszarka nie działa? Zanim zadzwonisz do Centrum serwisowego (
patrz Serwis
), przejrzyj
poniższe sugestie dotyczące rozwiązywania problemów:
Możliwe przyczyny/rozwiązanie:
• Wtyczka nie jest włożona do gniazda, albo styczność w gnieździe jest
niewystarczająca.
• Doszło do awarii instalacji elektrycznej.
• Bezpiecznik się przepalił. Spróbuj podłączyć do gniazda inne urządzenie.
• Czy używasz przedłużacza? Spróbuj podłączyć przewód zasilający suszarki
bezpośrednio do gniazda.
• Drzwi suszarki nie są dokładnie zamknięte?
• Program nie został odpowiednio ustawiony (
patrz Start i programy
).
• Przycisk Start/Pauza nie został naciśnięty (
patrz Start i programy
).
• Został ustawiony opóźniony start programu (
patrz Start i programy
).
• Filtr nie został wyczyszczony (
patrz Konserwacja
).
• Trzeba opróżnić pojemnik na wodę? Wyświetlane jest powiadomienie o
konieczności opróżnienia pojemnika na wodę? (
patrz Konserwacja
).
• Skraplacz wymaga czyszczenia? (
patrz Konserwacja
).
• Ustawiona temperatura nie jest odpowiednio dopasowana do rodzaju suszonej
tkaniny (
patrz Start i programy, oraz Pranie
).
• Czas suszenia został niewłaściwie dobrany do ładunku (
patrz Pranie
).
• Kratka nawiewu jest zablokowana (
patrz Instalacja, oraz Konserwacja
).
• Ubrania były zbyt mokre (
patrz Pranie
).
• Suszarka została przeładowana (
patrz Pranie
).
• Pojemnik na wodę prawdopodobnie nie został opróżniony przed rozpoczęciem
programu. Nie czekaj na pojawienie się powiadomienia o konieczności opróżnienia
pojemnika na wodę; zawsze sprawdzaj i opróżniaj pojemnik przed rozpoczęciem
nowego programu suszenia (
patrz Konserwacja
).
• To jest normalne. Powiadomienie KONIEC CYKLU, WYCZYŚĆ FILTR I OPRÓŻNIJ
POJEMNIK NA WODĘ jest ukazywane jako przypomnienie o konieczności
opróżnienia pojemnika (
patrz Wyświetlacz, oraz Start i programy
).
!
Ze względów bezpieczeństwa maksymalny czas pracy programów suszarki wynosi
5 godzin. Jeżeli automatyczny program nie wykrył wymaganego końcowego stopnia
wilgoci w tym czasie, suszarka zakończy program i zatrzyma się. Sprawdź powyższe
punkty i uruchom program ponownie, a jeżeli ubrania wciąż są wilgotne, skontaktuj
się z Centrum serwisowym (
patrz Serwis
).
• Jeśli na wyświetlaczu pojawia się komunikat o usterce
– Wyłącz suszarkę i wyjmij wtyczkę z gniazda. Wyczyść filtr i skraplacz
(
patrz Konserwacja
). Następnie włóż wtyczkę do gniazda, włącz suszarkę i
uruchom inny program. Jeśli nadal na wyświetlaczu pojawia się komunikat
o usterce, należy zapisać kod i skontaktować się z Centrum serwisowym
(
patrz Serwis
).
• Suszarka jest w trybie „Demo”. Naciśnij jednocześnie przyciski On/Off i Start/Pauza
i przytrzymaj je przez 3 sekundy. Na wyświetlaczu przez 3 sekundy ukaże się napis
DEMO OFF , a następnie suszarka wznowi normalne funkcjonowanie.
• Suszarka przełączyła się w tryb oczekiwania w celu oszczędzania energii. Taka
sytuacja ma miejsce w przypadku awarii zasilania lub gdy suszarka zostanie
włączona bez wybierania programu albo program suszenia zakończył się.
– Wciśnij i przytrzymaj przycisk On/Off aż zapalą się lampki.
Problem:
Suszarka się nie uruchamia.
Cykl suszenia się nie rozpoczyna.
Suszenie zajmuje dużo czasu.
Wyświetlane jest powiadomienie
o konieczności opróżnienia
pojemnika na wodę, ale suszarka
była uruchomiona tylko przez
krótki okres.
Wyświetlane jest powiadomienie o
konieczności opróżnienia
pojemnika na wodę, ale pojemnik
nie jest pełny.
Program się kończy, a ubrania są
bardziej wilgotne niż można było
oczekiwać.
Na wyświetlaczu widoczny jest kod
usterki F oraz jedna lub dwie
liczby.
Na wyświetlaczu na krótko pojawia
się napis DEMO ON , wyświetlany
co 6 sekund.
Lampki na panelu sterowania
suszarki nie świecą się, mimo że
urządzenie jest włączone.
19511931000 -PL_p55-72.qxd:19511931000 -PL_p55-72.qxd 24/01/2014 13:12 Page 16