background image

GB

11

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature 

(see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash ( ).
The Washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for 
each wash cycle.

Setting the drying cycle

Turn the DRYING knob to set the desired drying type.  
Two options are available:

A

 - Based on time: from 

40

 to 

180

 minutes.

B

 - Based on the how damp the clothes are once they 

have been dried:

Iron

  : slightly damp clothes, easy to iron.

Hanger

 

: dry clothes to put away.

Cupboard

  : very dry clothes, recommended for towel-

ling and bathrobes. 
If your laundry load to be washed and dried is much gre-
ater than the maximum stated load (see adjacent table), 
perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the 
drum. At this point, follow the instructions provided for a

 “Drying only”

 cycle. Repeat this procedure for the remainder of the 

load. 

N.B

: when the drying is complete there is a cooling period, even though the DRYING knob is in the   position.

Drying only

Turn the WASH CYCLE knob to one of the drying settings (

11-12-13

) according to the type of fabric, then select the desired 

drying duration using the DRYING button.

Functions

The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the 
selected wash cycle.

Super Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this 
function offers a high-performance wash.

!

 This function may not be used in conjunction with wash cycles 5, 8, 9, 10, 11, 12, 13, B, C.

Extra rinse

By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly 
useful for sensitive skin.

!

 This function may not be used in conjunction with wash cycles 8, 11, 12, 13, B, C.

Reduced Creases

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of 
the cycle the washing machine will perform slow rotations of the drum; the REDUCED CREASES and START/PAUSE indi-
cator lights will flash (orange) and the 

 phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE 

button or the REDUCED CREASES button. 
For the 

Silk

 wash cycle, the machine will end the cycle while the laundry is soaking, the REDUCED CREASES and START/

PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water so that the 
laundry may be removed, press the START/PAUSE button or the REDUCED CREASES button.

!

 This function may not be used in conjunction with wash cycles 8, 9, 11, 12, 13, A, B, C.

Slow Spin

By selecting this function, reduces the spin speed.

!

 This function may not be used in conjunction with wash cycles 8, 10, 11, 12, 13, C.

Personalisation

Table of Drying times 

(guideline values)

Fabric 
type

Load type

Max. 
load (kg)

Cupboard 
dry 

Henger 
dry 

Iron 
dry 

Cotton

Clothing of diffe-
rent sizes, Terry 
towels

5

180

170

140

Synthe-
tics

Sheets, Shirts, Py-
jamas, socks, etc.

3

140

120

100

Wool

Knitwear, Pullo-
vers. etc.

1.5

150

140

120

Summary of Contents for Aquarius WDF 756 A

















Reviews: