❍ ❍
❍
Before using your oven ALWAYS make sure that the timer has been
set to MANUAL operation. Unless this is done, the oven cannot heat
up.
So before seeking assistance, make sure this is done (refer to Timer
section)
To release any control knob simply press its centre.
Rotate the control knob in either direction to the required function.
Many of the functions will also require the oven thermostat or grill
control to be set before the appliance will heat up.
After use knobs can be returned to the storage position by pressing
them in at the centre.
This is used in addition to the multifunction selector. This is used for the
functions (fan oven, fan grill and top and base heat).
Turn the control clockwise to set the oven thermostat to the required
temperature. If the timer is set correctly and the selector switch set to a
suitable function an indicator light will illuminate. This will remain on
until the oven reaches the required temperature. This light will then
cycle on and off as the thermostat maintains control of the oven temper-
ature.
This is used in addition to the multifunction selector.
This is used for the functions (full grill and half grill).
Turn the control in either direction to the required setting. If the selector
switch is set to either full grill or half grill and the oven door is in its
grilling position then the grill will heat up. After use return all controls to
"O" (Off ) position.
A gentle flow of air will be detected, coming from beneath the control
panel when the oven or grill is switched on. This is a safety feature that
ensures the control panel surface and control knobs are kept cool.
Important
Multifunction
Selector
Oven Thermostat
Grill Control
Cooling Fan
THE CONTROLS
Note: It is advisable to check that all oven controls have been switched
off after you have finished using the appliance.
7
Grill
Control
Oven
Thermostat
Control
Multifunction
Selector