Installation Instructions
36
continued...
UNPACKING THE COOKER
Unpack the components from inside the grill and oven: Check that the following
parts are present.
Grill pan and grid
Aluminium burner bodies(4)
Baking dish
Pan supports
Main oven shelves (2)
Enamelled burner caps (5)
Top oven/grill shelf (1)
Literature
LEVELLING
Four skid feet are fitted which can be adjusted up or down to level the cooker.
CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)
Each burner requires the injector to be replaced and bypass screws adjusted or
replaced as follows:
1.
Remove the loose hotplate burner parts.
2.
Using a 7mm socket, replace the hotplate injectors as appropriate (see table
on previous page).
3.
Re-position the loose burner parts.
4.
Carefully pull off the hotplate control knobs.
5.
Using a narrow flat bladed screwdriver rotate the bypass screws fully
clockwise. The hotplate tap bypass screws are located down the centre of
the spindle.
6.
Re-assemble the control panel parts.
7.
Secure the self-adhesive LPG conversion label over the gas details on the
data badge.
