4
Door Reversal
If you need to change the door opening side,
lower the appliance onto its back and follow
the pictorial instructions below, in numerical
order, to ensure doors function properly.
Note: You may require assistance to carefully lay
the appliance onto it’s back, onto a suitable
protective material (ie. the original packaging).
Insert the open door into the door bearing (A)
IMPORTANT: The door journal (B) must be in
front of the door switch (C)
Changing the door handle
Follow the pictorial instruction below, in
numerical order:
Attaching the base panel
The base panel (1) is enclosed with the
appliance and can be found, either within the
appliance itself or at the rear of the condenser
(black grille).
●
Slide the base panel (1) onto the plastic
guides (2), until it locks into position.
WARNING: Switch off electrical supply and pull out mains
plug.
Alternatively you may wish our Service
Department to quote for an Engineer to
carry out the conversion for you, call
UK: 08709 066 066 or
Republic of Ireland: 1850 302 200
