Hotpoint FZA34, Instructions For Installation & Use

FREEZER - MODEL 

FZA34, FZM34-FZA36P-FZA36G

INSTRUCTIONS FOR INSTALLATION & USE

GETTING STARTED:

To ensure that your freezer runs reliably and efficiently follow these steps.

Choose a location for your

freezer, away from any

heat sources and allow

adequate ventilation -

30mm (1

1

/

4

inches) 

gap above.

Level the freezer by

adjusting the front feet.

This will stop rocking or

vibration and keep the

door aligned.

Plug in and switch on.

Allow the freezer to cool

before placing food

inside.

The high temperature

light will stay on until the

freezer has cooled down.

All food in the freezer

should be covered.

Move the freezer into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.

Before plugging in and
switching on, leave the
freezer in its final 
location for at least 15
minutes to allow it to 
settle.

If you are freezing fresh
food, turn on fast freeze by
pressing the switch 24
hours before placing the
food inside.
Place the fresh food
inside.

Read the rest of these instructions to get the best from your appliance 

and remember to fill in your guarantee registration.

Keep this Book in a safe place for quick reference.

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

SAFET

Y  & 

INST

ALL

A

TION

C

ONTR

OLS

USEFUL  AD

VICE

CLEANING  &

MAINTENANCE

TR
OUBLESHOO

TING

SER

VICE  &

GU
AR
ANTEE

Your freezer is now
working.
If after 24 hours your
freezer is not operating as
you want, refer to the
TROUBLESHOOTING
section.

STEP 7

NB. The spanner is for illustration

only and is not supplied with the

freezer.

Remember to turn fast freeze off
after 24 hours, however if you
forget to do so it will automatically
cancel after 48 hours.