PROBLEM
SPOTS AND
FILMING ON
GLASSES AND
FLATWARE
CLOUDINESS ON
GLASSWARE
CHIPPING OF CHINA
POSSIBLE
Spotting can be caused by
these things:
●
Extremely hard water. (See How to Choose and Use Detergent section).
●
Low inlet water temperature. (See How to Test Water Temperature section),
●
Overloading the dishwasher.
●
Improper loading. (See Loading section).
Old or damp powder detergent.
●
Phosphate
in detergent too
(See How to Choose and Use
Detergent section).
Rinse agent dispenser empty. (See How to Use a Rinse Agent section).
●
Too little detergent. (See How to Choose and Use Detergent section).
Local water conditions
personal preferences vary. Try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.
To remove stubborn spots and film from glassware:
1. Remove all metal utensils from the dishwasher.
2. Do not add detergent.
Select POTS & PANS
4. Start the dishwasher and allow to run
to 22 minutes. The dishwasher will
now be in the main wash.
5. Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of
the dishwasher.
6. Close the door and allow to complete the cycle.
If vinegar rinse doesn’t work: Repeat as above, except use l/4 cup (60 ml) of citric
acid crystals instead vinegar. (Most drugstores carry citric acid crystals. If yours
doesn’t, call GE Factory Service).
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.”
The film cannot be
removed.
It can be prevented: Use less detergent if you have soft water. Wash glassware in
the shortest cycle that will
them clean.
Water temperature entering dishwasher exceeds
Rough handling can cause chipping. Load with care. Make sure glassware and china
are secure and can’t jar loose. (See Loading section). Make sure tall glasses and
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack
15