background image

GB

9

Tray

*

Some dishwasher models are fitted with a sliding tray which 
can be used to hold small crockery and cutlery.
For optimum washing performance, avoid positioning bulky 
crockery directly below the tray. The cutlery tray can be 
removed. 

(see Figure.) 

Adjusting the height of the upper rack

The height of the upper rack can be adjusted: high position 
to place bulky crockery in the lower rack and low position to 
make the most of the tip-up compartments by creating more 
space upwards. 

The height of the upper rack should be adjusted WHEN THE 
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.

If the rack is equipped with a 

Lift-Up

 

device

*

 (see figure)

, lift 

it up by holding its sides. To restore the lower position, press 
the levers (

A

) at the sides of the rack and follow the rack down.

Unsuitable crockery

•  Wooden crockery and cutlery.
•  Delicate decorated glasses, artistic handicraft and antique 

crockery. Their decorations are not resistant.

•  Parts  in  synthetic  material  which  do  not  withstand  high 

temperatures.

•  Copper and tin crockery.
•  Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces 
can change and fade during the washing process. Some types 
of glass (e.g. crystal objects) can become opaque after a number 
of wash cycles too. 

Damage to glass and crockery

Caused by:

•  Type of glass and glass production process.
•  Chemical composition of detergent.
•  Water temperature of rinse cycle.

Tips:

•  Only  use  glasses  and  porcelain  guaranteed  by  the  

manufacturer as dishwasher safe.

•  Use a delicate detergent suitable for crockery.
•  Collect glasses and cutlery from the dishwasher as soon as  

the wash cycle is over.

*

 Only available in selected models.

Summary of Contents for LSTB 6M19

















Reviews: