to Set Oven for Cleaning
Quick Reminder:
1. Prepare the oven
cleaning.
2. Close the oven door completely.
3. Press the CLEAN pad.
4. Press
INCREASE or DECREASE
until desired Clean Time appears.
oven is too hot
you start to
cycle, the word “OFF” will appear in the display.
Allow additional time
cooling before you try
to set the
Only one oven time
be self-cleaned.
1. Follow directions to prepare
oven
cleaning.
2.
CLEAN
3.
A
--
—
the CLEAN pad.
Press the INCREASE
until desired
Time is displayed.
Time is
hours. You
Clean Time to anywhere between 2 and 4 hours,
depending on how dirty your oven is.
The self-c
will automatically begin after
“CLEAN” is displayed and the time for the Clean
cycle is set. The words “ON” and “LOCK” will
appear on the display. It will not be possible to open
the oven door until the temperature drops below
lock temperature and the LOCK light goes oft.
4. When the LOCK light is off, open the door.
NOTE: You
find out when the
STOP
clean cycle
be finished by pressing
TIME
the STOP TIME button.
word
will be displayed, the word
oven control will signal if
set
clean
forget to close the oven door.
Stop a
Cycle
1. Press the CLEAR/OFF pad.
2. Wait until the
has
locking
CLEAR
You will not be able to open the
OFF
door right away unless the oven temperature is
safe level.
After Self-Cleaning
You may notice some white ash in the oven. Just wipe
it up with damp cloth after
oven cools.
If white spots remain, remove them with soap-filled
steel wool
Be sure to rinse thoroughly with
mixture. These deposits
usually
a
residue that
be removed by
clean cycle.
the oven is not clean after one clean cycle,
repeat the cycle.
NOTE: No functions can be programmed before the
door automatically unlocks.
23