OVEN CONTROL, CLOCK
—
To Set the Clock
must
be
to the
correct time
for
1. Press the CLOCK pad.
the automatic oven
functions
work properly.
The time of
cannot be changed during Timed
CLOCK
or Clean
2.
Press the INCREASE DECREASE
A
set the
time
day.
3. Press the CLOCK pad start.
Timer
To Set the Timer
The
is minute timer; it does
1. Press the
not control
operations. The
TIMER pad.
maximum setting on the timer is
TIMER
9 hours
55 minutes.
2. Press the
I
INCREASE or
DECREASE
to
set the amount of
m
.
time
the timer.
The timer will start
automatically within
seconds of releasing the
INCREASE or DECREASE pad.
The timer, as you are setting it,
will display hours
minutes.
be in the display.
During the countdown, when the
timer reaches the last minute, the
display will change to seconds
only and single beep will sound.
To Reset the Timer
To Cancel the Timer
If “TIMER” is showing, press the INCREASE or
Press the TIMER pad while the word “TIMER”
DECREASE pad until the desired time is reached.
is displayed.
If “TIMER” is not showing, press the TIMER pad
then
the instructions above to set the timer.
End of Cycle Tones
The
of cycle tone is a series of three beeps followed by one beep
every six seconds. you would like to remove the
that beeps
every six seconds, press and hold the CLEAR/OFF pad
ten seconds.
To return the
that
every six seconds, press and hold the
CLEAR/OFF pad for ten seconds.
Display Messages
— If
appears in the display, the oven door is opened and
to be closed.
If “LOCK” appears in the display, the oven door is in the
position. BAKE, BROIL
COOK TIME cannot set the
is in the locked position.
9
