Great user manuals database on
GB
13
To assemble the sliding racks:
1. Loosen the two
screws A (
see diagram
).
If the oven is fitted with
self-cleaning panels,
these will have to be
temporarily
disassembled.
2.
Replace the screws A with the screws and
spacers (B + C) supplied with the kit.
3.
Tighten the new screws B and the
corresponding spacers C, fitting the self-cleaning
panels on again.
4. Secure the two joints
D of the guide rail in the
holes provided on the
oven walls (
see
diagram
). The holes for
the left guide rail are
situated at the top, while
the holes for the right
one are at the bottom.
5.
Finally, fit the guide rail on the spacer C.
Sliding Rack Kit assembly
B
C
