16 of 49
Service Manual UK
I
ndesit
C
ompan
y
English
Setting the Clock
To set the clock, switch on the oven by pressing the
icon, then press
and follow the steps
described.
1.
Scroll through the menu commands using the control dial, select CLOCK and press
.
2.
Adjust the time using the control dial.
3.
Once you have reached the correct hour value, press the
icon.
4.
Repeat steps 2 and 3 to set the minutes.
5.
To exit adjustment mode, press the
icon or use the control dial to scroll through the menu until
you reach EXIT, then press
.
The clock can also be set while the oven is off, by pressing the
icon and carrying out steps 2 to 4
as described above.
After the appliance has been connected to the mains, or after a power cut, the clock will need to be
reset.
Setting the Minute Minder
The minute minder may be set regardless of whether the oven is switched on or off. It does not switch
the oven on or off.
When the set time has elapsed, the minute minder emits a buzzer that will automatically stop after 30
seconds or when any active button on the control panel is pressed.
To adjust the minute minder, proceed as follows:
1.
Press the
icon.
2.
Set the desired time using the control dial.
3.
Once you have reached the desired value, press the
icon again.
When the oven is switched off, the countdown appears on the display. When the oven is on, the lit
symbol will remind you that the minute minder is active.
To cancel the minute minder, press the
icon and use the control dial to set the time to 00:00.
Press
again.
The
icon will switch off to indicate that the minute minder has been disabled.
Starting the Oven
1.
Press
to switch on the control panel. The appliance buzzer sounds three times (ascending).
2.
Press the
icon to select the desired manual cooking mode. The cooking temperature and
duration may be set.
Press the
icon to select the desired automatic cooking mode. The cooking temperature and
duration are both set to default values. Only the duration may be adjusted in accordance with the
selected mode. The text 'AUTO' appears on the display to indicate that the temperature is
following a precise cooking profile. A delayed cooking cycle may be programmed.
3.
Press
to start the cooking mode.
4.
The oven will begin its preheating phase, the preheating indicators will light up as the temperature
rises.
5.
When the preheating process has finished, a buzzer sounds and all the preheating indicator lights
show that this stage has been completed: the food can then be placed in the oven.
