17 of 49
Service Manual UK
I
ndesit
C
ompan
y
English
6.
During cooking it is always possible to:
-
adjust the temperature by pressing the
icon, turning the control dial and confirming by
pressing
again
(
manual modes only
);
-
set the duration of a cooking mode (see Cooking Modes);
-
stop cooking by pressing the
icon. In this case the appliance stores the temperature
modified previously in its memory (manual modes only);
-
switch off the oven by pressing the
icon for 3 seconds.
7.
If a power cut occurs while the oven is already in operation, an automatic system within the
appliance will reactivate the cooking mode from the point at which it was interrupted, provided that
the temperature has not dropped below a certain level. Programmed cooking modes which have
not yet started will not be restored and must be reprogrammed (for example: a cooking mode has
been programmed to start at 20:30. At 19:30 a blackout occurs. When the power supply is
restored, the mode will have to be reprogrammed).
There is no preheating stage for the GRILL mode.
Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being
damaged.
Always place cookware on the rack(s) provided. If the oven shelf has a back stop, when inserting the
shelf, make sure that the back stop is at the rear of the cavity.
Cooling Ventilation
In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as towards the bottom of the oven door. At the beginning
of the cleaning cycle, the cooling fan operates at low speed.
Once cooking has been completed, the cooling fan continues to operate until the oven has cooled
down sufficiently.
Oven Light
The light comes on when a cooking mode starts (
if enabled in the settings menu
).
When models featuring
LED INSIDE
technology begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.
Residual Heat Indicators
The appliance is fitted with a residual heat indicator. When the oven is off, the 'residual heat' bar on the
display lights up to indicate high temperatures inside the oven cavity. The individual segments of the
bar switch off one by one as the temperature inside the oven falls.
Restoring the Factory Settings
The oven factory settings can be restored to reset all selections made by the user (language, tone,
customised durations, etc…). To carry out a reset, switch off the oven, then press and hold
,
and
simultaneously for 6 seconds. Once the restore procedure is complete, a buzzer will
sound.
The first time the
icon is pressed, the oven will behave as if it is being switched on for the first time.
